Autoclave

Overview of carbon fiber autoclave

Carbon fiber autoclave, glass fiber autoclave is the key process equipment of polymer matrix composite component products molding, belonging to the composite autoclave. Autoclave molding process is to seal the composite blank, honeycomb sandwich structure, or bonded structure with a vacuum bag on the mold, placed in the autoclave, in the vacuum (or non-vacuum) state, through the process of subsection heating, subsection pressure, subsection insulation (medium temperature or high temperature) pressure preservation, cooling pressure relief, so that it becomes the molding process of the required shape and quality state products. The forming process of carbon fiber autoclave and glass fiber autoclave is one of the main forming methods of composite material structure, honeycomb sandwich structure and metal or composite material bonding structure. The main application areas of autoclave are aerospace, aviation, national defense, electronics, automobiles and other vehicles, boats, sports equipment and other composite materials.

Technical parameters of carbon fiber autoclave

Effective diameter: φ600mm-4000mm

High working pressure: 0.8MPa-4.0MPa

High operating temperature: 180℃-450℃

Heating form: electric heating/thermal oil heating/steam heating

Cooling form: water cooling

Heating rate (no load) : 0.5-5℃/min

Cooling rate (no load) : 0.5-5℃/min

Temperature uniformity: ≤±1.0-3.0℃

Number of thermocouples: 2-24 channels

Voltage boost rate: 0-0.1MPa/min, adjustable

Pressure reduction rate: 0-0.1MPa/min, adjustable

Number of vacuum channels: 2-24

Vacuum pump: one ready and one used

Main control forms:

PLC+ touch screen, can achieve air temperature control and mold temperature control (large value, average value, small value) vacuum degree adjustable, can be equipped with recorder.

PLC+ touch screen + computer, can achieve air temperature control and mold temperature control (large value, average value, small value) vacuum degree adjustable, can be equipped with recorder.

PLC+ touch screen + computer (redundant), can achieve air temperature control and mold temperature control (large value, average value, small value) vacuum degree adjustable, can be equipped with a recorder.

PLC+ touch screen + computer + instrument (redundant), can achieve air temperature control and mold temperature control (large value, average value, small value) vacuum degree adjustable, can be equipped with a recorder.

Specifications of carbon fiber autoclave

600 x 800,1000 x 2000,1200 x 2400,1500 x 3000,2000 x 4000,2500 x 5000,3000 x 6000, 4000 x 8000